The high-power charger adopts a fully functional power supply IC, and the digital logic circuit performs sampling control to automatically detect the state of the charged battery. The charger adopts the "constant current-constant voltage current limiting-constant voltage floating charging" charging mode, which achieves the fully automatic working state, and is especially suitable for unattended work. The selection of high-quality components guarantees the reliability and stability of the product itself, and can significantly extend the service life of the battery.
The main function
First, the main function of high power charger IBCE-2212
1. Adopting the “constant current-constant voltage current limiting-constant voltage floating charging” charging mode, it is required to reach the fully automatic working state, which is suitable for unattended work.
2. Built-in memory, can store at least ten sets of charging data.
3. The device has a USB interface for easy data import to the computer for viewing.
4. The equipment is equipped with background analysis software to view and analyze the entire set of charging curves.
5. It has the advantages of simple operation, fast charging speed, high charging and reduction efficiency, and no danger of overcharging after charging.
6. Voltage/current data display, with overvoltage, undervoltage, overcurrent, output short circuit, anti-reverse protection and overheat protection.
7. It adopts wave width modulation technology, high efficiency, high power factor, low noise, small electromagnetic interference, and can be used in electric equipment room.
8. The main machine is equipped with wheels for easy movement and transportation to meet the charging requirements of different computer rooms.
9. The charging output current 1-120A is continuously adjustable and the digital panel is input.
10. The charging output voltage is continuously adjustable from 30-300V, and the digital panel is input.
Product Features
1, function settings
A. Constant current charging, constant voltage charging, floating charging or parallel operation can be set.
B. It can set the alarm settings of voltage, current, battery temperature and mains abnormality to protect the battery and the safety of the machine.
C. Charging completion condition: The charging procedure can be completed by setting the charging constant voltage time, charging time and charging capacity, and the input range can be limited to prevent over-discharge.
2. High Frequency Switched Mode rectifier circuit, which controls the voltage and current with a microcomputer to form a high-confidence charging circuit.
3. With electromagnetic interference (EMI) suppression and surge protection circuit. Microprocessor control, electronic discharge circuit
4, can be operated independently, or connected to a personal computer, and multiple parts in parallel, you can measure a larger capacity battery.
5, light weight, can be free to move test, one instrument can meet the substation power plant all capacity less than 1000AH 220V battery pack charging.
6, the charger has a power-down save function. After the power is turned off, all test data is not lost. Continue charging after power-on to prevent accidental power failure from affecting the test results.
7, U disk data transfer interface. At the end of charging, the data can be automatically generated by the U disk dump or uploaded to the computer through the 232 interface for background processing. The battery performance is clear at a glance.
8. With voltage and current calibration correction function, the measurement value of the instrument can be corrected and corrected at any time to ensure measurement accuracy.
9, equipped with high current power chuck, quick connector, easy to install and disassemble.
Technical Parameters
Current adjustment fineness 1A
Charging control accuracy 1%
Total voltage measurement accuracy 0.1%
Timer 0-99 hours continuously adjustable
Working power supply 380V
Efficiency ≥0.85
Insulation strength input to the casing and the output ≥1500V
Output to the shell ≥1500V
Mean Time Between Failure (MTBF): ≥50000h
Transfer rate 9600bps
Cooling type air-cooled
Display mode backlit LCD, Chinese
Use environment 5-50 °C 10%-90% RH
The background analysis software is equipped with Chinese analysis software, which can view the charging voltage and current graph of the battery pack. The host is equipped with a USB interface to facilitate data export.
Main application of charging and maintenance of 220V/110V battery pack for power supply of power substation power plant
Remarks can be tailored to your needs according to the needs of the site. For details, please consult, agents are welcome, OEM support is welcome.
Instructions for use
1. Unpacking: When opening the box, you should check the random accessories in the box.
2. Check before power-on: Before powering the high-power charger stored and transported, check the damaged condition during transportation, such as whether the screw can be loosened, whether the appearance is abnormal, whether it is damp, etc. If any of the above phenomena occur, it should be handled properly in time.
3. Wiring: Add the air switch to control the power input at the input end of the high-power charger. Connect the safety ground wire and the input power cable according to the logo of the rear baffle to confirm the connection is correct and the connector is strong. Does the voltage of the input power source that is intended to be connected match the nominal voltage on the manual.
4. When the heat-dissipating fan is temperature-controlled, when the temperature inside the machine exceeds the temperature-controlled point of the fan, the fan inside the machine can be turned on. The fan speed is fast and slow with the output voltage and current, which is normal. Condition; please do not block the air inlet and outlet of the fan during operation.
5. When the temperature inside the machine reaches too high and reaches the temperature of the thermal shutdown temperature, the machine will actively stop the operation and ensure that it will not be damaged. When the temperature is slightly reduced, it will automatically start the recovery work.
6. When the high-power charger is in use, the dust, acid, corrosive gas or substance in the air should not exceed the normal content, and there should be no violent sensation, smoothness and rain, and try to prevent direct sunlight.
